- In carbon fibre, except roof and door external panels (steel)
- Type Mechanical (rack and pinion) power-assisted
- Right-hand turning circle 12.55 m
- Wheels and tyres
- Front 245/35 ZR 18
- Rear 335/30 ZR 18
- 4 valves per cylinder, 4 overhead camshafts
- Timing gear transmission 2 chains
- Continuous timing variator (int. and ex.) Electronically controlled
- Fuel system/injection
- Lamborghini LIE electronic engine control unit, multipoint, sequential timed, DRIVE BY WIRE
- Type Liquid cooled, with pressurized circuit
- 4-wheel independent articulated quadrilateral system. Hydraulic shock absorbers and coaxial coil springs. Suspension with dual front and rear struts, antiroll, antidive and antisquat bar.
- Top speed 340 km/h
- Acceleration 0-100 km/h 3.4 s
Gearbox and transmission: improved efficiency and strength
More power and higher torque call for superior gearbox component performance. To meet these new demands, the new Murciélago LP640 features a modified six-ratio gearbox as well as a tougher rear differential and new axle shafts. On request, the e-gear automatic gearbox is also available equipped with the new dedicated “Thrust” (acceleration programme) mode.
Just like its predecessors, the Murciélago LP640 features permanent four-wheel drive, based on the reliable Lamborghini VT (Viscous Traction) system. The system is self-governing and does not feature any electronic controls. The drive force is usually divided between the front and rear axles in the ratio of 30 to 70. An independent control circuit adjusts the distribution of the drive force depending on dynamic oscillation, weight distribution and the relative friction factor in perfect synchronisation with the Visco clutch. In extreme cases, up to 100% of the drive force can be applied to a single axle.
Electronics: a "closed loop" for total control
The electronics have also been updated. The modified engine control units improve engine performance and “driveability” thanks to “closed loop” control.
Every engine and vehicle parameter is managed and controlled by three “master” control units and a “satellite” control unit. The master control units consist of two Lamborghini "LIE" engine control units, a Lamborghini “GFA” (Auxiliary Function Management) control unit and a Lamborghini “PMC” (Power Motor Control) satellite control unit. The control units are interconnected by a CAN Bus line.
Frame and chassis: perfect harmony
The body of the Murciélago LP640 with its characteristic scissor doors is created from the prized union of sheet steel and honeycombed carbon fibre, glued and riveted together.
Driving, handling and stability at high speed are enhanced by new springs and stabilisers, as well as by a redesigned electronically controlled damper. The "anti-dive" and "anti-squat" features on the axles, which efficiently prevent so-called "brake diving" and "squatting", have not been changed. The two springs on every rear wheel, the single spring on every front wheel and the damper are placed coaxially.
The new aluminium "Hermera" rims measure 8 ½" x 18" (fore carriage) and 13" x 18" (rear axle). The vehicle can be fitted with various sized Pirelli P Zero "Rosso" tyres. The Murciélago LP640 features 245/35 ZR 18 front tyres and 335/30 ZR 18 rear tyres. For sports use, especially on racetracks, Lamborghini provides optional Pirelli P Zero “Corsa” (Race) tyres. Pirelli P “Sottozero” (Sub zero) winter tyres are currently being developed.
Brakes and safety: optional ceramic carbon brakes
A super sports car such as the Lamborghini Murciélago LP640 ensures high safety levels.
The dual hydraulic circuit brake system equipped with a vacuum brake booster ensures considerable deceleration values. The self-ventilating front and rear brake disks measure 380 mm x 34 mm and 355 mm x 32 mm respectively. The control circuit of the four-channel anti-blocking system (ABS) with electronic brake control (DRP) and traction control (TCS) features a new characteristic curve. The system consists in an electro-hydraulic control unit and four speed sensors.
When particularly high braking performance is required, on request it is possible to equip the vehicle with 380 mm x 36 mm ceramic carbon brakes featuring six-piston brake callipers. Thus, less pressure needs to be applied to the brake pedal and the braking distance is reduced. Even in extremely demanding conditions there is almost no perceptible fading. Considerably reduced weight and superior lifetime represent two further advantages, as well as a captivating graphic design.
The new Murciélago LP640 also meets with even the most rigorous safety requirements. Thanks to the two front airbags (a 60-litre single stage air bag on the driver side and a 130-litre two stage airbag on the passenger side), the Murciélago LP640 complies with every international law in effect in terms of head-on and side crashes, impacts against posts, occupant safety, fuel supply integrity and flammability of materials. The luggage compartment also complies with childproof safety regulations.
Interior: even more exclusive and customised
The seats in the cockpit have undergone the most radical changes; more spacious and equipped with redesigned head restraints, the seats now ensure better comfort. The leather upholstery features lozenge-shaped stitching called "Q-citura". The same design is recaptured on the upholstery on the door panels, the panel between the seats and the engine compartment, and on the roof panel.
A new instrument panel has been developed with lights featuring a new graphic design, flanked by a new Kenwood car radio with a 6.5” widescreen monitor and DVD, MP3 and WMA player. An optional navigation system is also available (standard in Japan).
Like its predecessors, the new Murciélago LP640 can be customised thanks to the special fittings and upholstery packages. For the first time, the renowned characteristic Murciélago Roadster asymmetric and driver-oriented fittings and upholstery are available for the Coupé, featuring a perforated leather driver’s seat and door panel.
Thanks to the "Privilegio" customisation program, any Murciélago LP640 can be transformed into a customised sports car. For example, the cockpit can be enhanced with an extremely refined carbon finish applied to the air conditioning control panel, the control lever console and the parking brake.
Technical Data Frame
Bodywork
Steering
Engine
Type | 12 cylinders at 60° |
Bore | 88 mm |
Displacement | 6496 cc |
Compression ratio | (11 ± 0.2):1 |
Maximum power | 640 hp (471 kW) at 8000 rpm |
Maximum torque | 660 Nm at 6000 rpm |
Engine position in vehicle | Longitudinal central-rear |
Cylinder heads and engine block | Aluminium |
Intake system | Variable geometry with 3 operating modes |
Timing
Ignition system
Lubrication system
Type | Dry sump |
Recovery pumps | 2 gear pumps |
Delivery pump (high pressure) | 1 gear pump |
Cooling system
Transmission
Type of transmission | Permanent all-wheel drive with Viscous Traction system |
Gearbox | 6-speed mechanical gearbox |
Clutch | Dry single disc |
Clutch disc diameter | 272 mm |
Disengagement | With self-adjusting hydraulic control |
Transmission ratios
Gearbox: | |
Ist | 1:3.091 |
IInd | 1:2.105 |
IIIrd | 1:1.565 |
IVth | 1:1.241 |
Vth | 1:1.065 |
VIth | 1:0.939 |
Reverse | 1:2.692 |
Brakes
4 self-ventilated rotors with pedal control, hydraulic transmission with dual independent circuits, one for each axle with vacuum servo. ABS antilock device + DRP function. | ||
Steel brake lines | ||
Front rotor | Ø 3 80 x 34 mm | |
Front calliper cylinders | N. 8 (32-28 mm/32-28 mm) | |
Rear rotor | Ø 355 x 32 mm | |
Rear calliper cylinders | N. 4 (40-44 mm) | |
Ceramic rotors system (Optional) | ||
Front rotor | Ø 380 x 38 mm | |
Front calliper cylinders | N. 6 (32-36-38 mm) | |
Rear rotor | Ø 3 80 x 3 8 mm | |
Rear calliper cylinders | N. 6 (32-36-38 mm) | |
Handbrake | Mechanical, acting on rear wheels |
Suspension
Performance data
Dimensions
Wheelbase | 2665 mm |
Total length | 4610 mm |
Total width | 2058 mm |
Total height | 1135 mm |
Dry weight (no fuel) | 1665 kg |
Front trackwidth | 1635 mm |
Rear trackwidth | 1695 mm |
Front overhang | 1005 mm |
Rear overhang | 910 mm |
Maximum overall width with external rear-view mirrors | 2240 mm |
Fuel tank | 100 litres |
Engine oil | 12 litres |
Gearbox oil | 3.5 litres |
Front differential oil | 1 litre |
Rear differential oil | 2.5 litres |
Cooling circuit | 15 litres |
1 | 2
Related entries:
Edo Competition Lamborghini Murcielago LP 640 Versione Nardo
HAMANN Lamborghini Murciélago LP640 Test Drive
Lamborghini Murciélago Roadster LP640 Revealed
HAMANN Lamborghini Murciélago LP640 Test Drive
Lamborghini Murcielago LP640 Aerodynamic Package by IMSA
Lamborghini Ad Personam Program at 2008 NAIAS
Lamborghini to Bow Out Murcielago with Lightweight SV
Source URL: http://nensycarblog.blogspot.com/2008/01/lamborghini-murcielago-lp640-in-detail.html
Visit NENSY CAR BLOG for Daily Updated Hairstyles Collection
0 comments:
Post a Comment