http://www.777seo.com/seo.php?username=wahyudewi&format=ptp
Friday, May 8, 2009

Mosler MT900 GTR XX Twin Turbo Land Shark Revealed


    Nicknamed "The Land Shark", this car weighs a full 250 kg (551 lbs) less than the already lightened GTR XX, coming in at 861 kg (1898 lbs) with its fuel tanks full. Yes, we said "tanks", as in plural. This car runs on a multi-fuel system using petrol, methanol, hydrogen, and ethanol. Gocha claims that the use of multiple fuels means he was able to register his car as a "hybrid" in California, meaning he gets to take this monster into the often wide-open carpool lanes of Los Angeles!


    Here's where the story gets a little suspicious, and no offense to Gocha is meant by this. After all, Gocha has to realize that there will be skeptics when a relative unknown claims to have put something like this together. We all know that the GTR XX uses the GM LS7 engine which powers the Corvette. Gocha says his car utilizes an engine with a 381 cubic inch plant generating an unbelievable 2,500 horsepower, in part thanks to the twin turbos. We instantly thought that the engine he was using was the LSX from GM Performance Parts, which is capable of handling that kind of horsepower.


    Now, before you start casting stones, lets keep in mind another little twin-turbo Mosler that goes by the name of "Red Devil." Remember this car? Built by Nelson Racing Engineering for U.S. Mosler dealer Mike Vietro (aka Corvette Mike or Mosler Mike) it produces 1800hp (1635hp confirmed) and has performance specs within range of this suppossed Land Shark.


    However, the spec sheet says the block is from billet aluminum while the LSX is made of cast iron. He says his engine uses a 3.000" stroke and 4.500" bore, which would actually be a 382 cu. inch plant. His billet aluminum block engine has four injectors of varying sizes per cylinder, combined with racing fuel pumps capable of delivering six gallons (22.7 liters) per minute. Apparently, you can go really really fast in this car, just not for long. The engine also makes generous use of ceramic, titanium, and carbon to keep the weight down.


    While the MT900 GTR normally goes from standstill to 100 km/h in 3.1 seconds, Gocha claims his version gets there in just over 2.5 seconds. His car allegedly hits 150 mph in 6.7 seconds, and 250 mph in 17.5 seconds. The car is capable of a nine second quarter-mile, reaching 178 mph by the time it gets there. Even more astonishing is the sprint to stop time. This car allegedly goes from zero to 150mph and back to a dead stop in 8.7 seconds. That's even faster than the Ultima GTR 0-100-0 time of 9.4 seconds, which seems remarkable.


    But also seems dubious.

    Helping to achieve these unbelievable times is the car's aerodynamic body kit. As seen in these photos Gocha and co. have created a new front splitter, new dive planes, and a fully adjustable rear wing built from carbon fiber. Also added are new air intakes and outlets on the sides, and new intakes on the roof and upper body. They installed a full-length air ducting channel via the flat belly pan to get the best downward force possible.


    Intense Automotive Design also claims to have developed an all-wheel-drive system of titanium and carbon fiber, matching the all-titanium suspension system. Carbon fiber Dymag wheels have a magnesium center, and uses titanium lug nuts to attach to the car. Front wheels measure 11.5x19", with bigger 14x20" rear wheels. With all that effort going in to weight savings, you wonder why an Alpine 7.1 Dolby Digital DVD system would be included. The In-Car PC and GPS also adds weight.


    More Photos


    Press Release

    2009 MOSLER MT900

    ENGINE SPECS:
    381 CUBIC INCHES
    2,500+ HP 10,000 RPM TWIN TURBOCHARGED TERROR
    MULTI-FUEL SYSTEM: GASOLINE/METHANOL/HYDROGEN/ETHANOL
    3.000" STROKE WITH 4.500" BORE
    2-MOTEC M880 DIGITAL ENGINE MANAGEMENT SYSTEMS
    IAD BILLET CNC BILLET ALUMINUM BLOCK
    IAD CERAMIC ROLLER-BEARING CRANKSHAFT AND CAMSHAFT BEARINGS
    IAD/BRYANT/KEITH BLACK 4330 KNIFE EDGED, ULTRA-LIGHT ROLLER-BEARING CRANKSHAFT
    IAD CNC BILLET TITANIUM CONNECTING RODS
    IAD/COSWORTH CERAMIC COATED FORGED PISTONS
    IAD 4340 1.000" DIAMETER .300" WALL THICKNESS PISTON PINS
    1/16-INCH CHILD'S & ALBERT CHROMOLY RINGS
    IAD 4-VALVE BILLET CNC ALUMINUM/CERAMIC CYLINDER HEADS
    IAD CERAMIC COMBUSTION CHAMBERS & EXHAUST PORTS; BERYLLIUM SEATS
    IAD CUSTOM LASER CUT HEAD GASKETS, O-RINGED CYLINDER HEADS
    IAD CUSTOM O-RINGED INTAKE MANIFOLD AND CYLINDER HEAD INTAKE SURFACES
    IAD/JESEL TITANIUM ROLLER ROCKERS WITH SOLID TITANIUM GIRDLE
    IAD/JESEL 3-PIECE .160" WALL TAPERED 9/16 "-1/2" MODULAR PUSH RODS
    IAD/CROWER PINNED 1.000" DIAMETER ROLLER LIFTERS
    IAD CERAMIC COATED 2.00" TITANIUM INTAKE VALVES, 1.75" INCONEL® EXHAUST VALVES
    JESEL TRIPLE VALVE SPRINGS, TITANIUM RETAINERS, 4340 LOCKS
    IAD BILLET CNC TITANIUM/CARBON VALVE COVERS, POLISHED
    IAD TITANIUM ROLLER CAMSHAFT WITH CERAMIC ROLLER CAM BEARINGS
    IAD/JESEL BELT DRIVE CAMSHAFT TO CRANK TIMING, WITH TITANIUM GEARS
    IAD CNC BILLET TITANIUM/CARBON MACHINED TIMING COVER
    IAD HARMONIC DAMPENER WITH INTEGRAL CRANK TRIGGER PICKUP
    IAD BILLET TITANIUM/CARBON DUAL ELECTRIC WATER PUMPS
    ALL TITANIUM ENGINE HARDWARE

    INDUCTION SYSTEM:
    IAD CNC CARBON FIBER/TITANIUM INTER-COOLED INTAKE MANIFOLD
    4-INJECTORS PER CYLINDER (2) 150 LB., (1) 90LB., AND (1) 60LB.
    2-WELDON 34706 6+ GPM MECHANICAL RACING FUEL PUMPS
    2-AEROMOTIVE 16302 BILLET FUEL PUMP SPEED CONTROLLERS
    4-WELDON A2047 SERIES, HIGH FLOW 10+ GPM BYPASS REGULATORS
    2-OCTANE ON DEMAND SYSTEMS
    2-IAD DIGITALLY CONTROLLED INTEGRAL FUEL PRESSURE REGULATORS, 2500 CFM
    RUSSELL'S BRAIDED STEEL FUEL LINES WITH AN FITTINGS
    2-88MM IAD/AEROTECH WATER COOLED CERAMIC BALL BEARING TURBO CHARGERS
    2-IAD/MOTEC 65MM PROTOTYPE ELECTRONICALLY CONTROLLED WASTE GATES
    IAD TITANIUM EXHAUST HEADERS, FLANGES, V-BANDS
    IAD TITANIUM EXHAUST SYSTEM
    IAD TITANIUM HI-FLOW CATALYTIC CONVERTERS, MUFFLERS, MOUNTS, HARDWARE

    LUBRICATION SYSTEM:
    IAD CNC TITANIUM DRY SUMP OIL SYSTEM CAPACITY = 20 LITERS
    IAD/MOROSO 5-STAGE DRY SUMP OILING SYSTEM
    IAD/MOROSO TITANIUM BILLET OIL PUMP DRIVE
    RUSSELL'S BRAIDED STEEL OIL LINES WITH AN FITTINGS
    2-IAD CUSTOM HI-VOLUME OIL COOLERS

    IGNITION/ELECTRONICS SYSTEM:
    IAD/MOTEC FUEL INJECTION SYSTEM
    IAD/MOTEC M880 ENGINE MANAGEMENT SYSTEM (DUAL M880 UNITS)
    IAD/MOTEC CRANK FIRED IGNITION SYSTEM
    MOTEC ON-STEERING-WHEEL MOUNTED HORSEPOWER MANAGEMENT SYSTEM
    IAD/MOTEC POWER CONTROL SYSTEM, VARIABLE FROM 800 TO 2,500+ HORSEPOWER
    MOTEC ON-STEERING-WHEEL DIGITAL BRAKE BIAS CONTROL
    MOTEC ON-STEERING-WHEEL ACTIVE SUSPENSION CONTROL
    MOTEC ON -STEERING-WHEEL 12-STAGE DIGITAL FUEL INJECTION CONTROL
    IAD/MOTEC CARBON FIBER DIGITAL STEERING WHEEL WITH INTEGRAL DIGITAL CONTROLS
    IAD PROTOTYPE 8-SPEED PADDLE SHIFTERS, WITH QUICK-RELEASE
    MOTEC PIT-LANE SPEED CONTROL BUTTON
    CUSTOM ALPINE 7.1 DOLBY DIGITAL A/V/DVD/MOTEC EMS DISPLAY
    LOWRANCE GPS WITH FRONT, REAR, SIDE, 360 DEGREE SKYTM RADAR TRACKING SYSTEM
    IN-CAR PCTM MOBILE INTEL CORE 2 DUO 2.33 GHZ
    3.5G MOBILE INTERNET 7.2 MBPS

    TRANSMISSION SYSTEM:
    IAD PROTOTYPE TITANIUM/CARBON FIBER ALL-WHEEL-DRIVE SYSTEM
    TRACTION CONTROL BY MOTEC
    IAD CNC BILLET TITANIUM 8-SPEED TRANS-AXLE
    QUICK-CHANGE GEAR-BOX, 30 SETS OF TRACK GEARS
    WELDON K9200-A HIGH TEMP TRANS & AWD OIL PUMP
    RUSSELL'S BRAIDED STEEL OIL LINES
    IAD TRANSMISSION AND FRONT DIFFERENTIAL COOLERS

    SUSPENSION/BRAKING SYSTEM:
    ALL TITANIUM SUSPENSION COMPONENTS
    PENSKE 3-WAY ADJUSTABLE RACING SHOCKS
    FULLY ADJUSTABLE FRONT AND REAR AND SWAY BARS
    CNC MACHINED SOLID DELRINTM SUSPENSION BUSHINGS
    CARBON FIBER/CERAMIC 400MM DIAMETER BRAKE ROTORS
    8-PISTON, LIQUID COOLED, CNC BILLET CALIPERS

    AERODYNAMICS:
    FRONT SPLITTER FOR MAXIMUM DOWN-FORCE
    FRONT LEFT AND RIGHT DUAL DIVE PLANES
    LEFT AND RIGHT SIDE POD AIR INTAKES AND OUTLETS FOR OPTIMAL COOLING
    ROOF CANOPY AIR-INTAKE WITH SCOOP
    MID UPPER BODY SECTION LEFT AND RIGHT AIR INTAKES
    FLAT BELLY PAN WITH FULL LENGTH AIR DUCTING CHANNEL FOR MAXIMUM DOWN FORCE
    REAR DECK LID SIDE VENTS
    REAR FULLY ADJUSTABLE CARBON FIBER REAR WING

    WHEELS:
    DYMAG CARBON FIBER, MAGNESIUM CENTER, TITANIUM LUG NUTS
    FRONT 11.5" X 19"
    REAR 14" X 20"

    TIRES:
    MICHELIN PILOT SPORT 2
    FRONT 285/35R19 PS2
    REAR 345/30R20 PS2

    COCKPIT:
    ALL INTERIOR SURFACES ARE POLISHED, CLEAR COATED, CARBON FIBER
    CUSTOM PROTOTYPE DESIGN CARBON FIBER SEATS
    SCHROTH TITANIUM 6-POINT SEAT BELTS
    DUAL CARBON FIBER FUEL CELLS FOR FUEL/METHANOL
    REGISTERED AS A "HYBRID" VEHICLE DUE TO THE MULTI-FUEL ENGINE....
    I WILL GET TO DRIVE IN THE DIAMOND LANE..... HA! HA! HA!
    FUEL CAPACITY, GASOLINE = 100 LITRES
    FUEL CAPACITY, METHANOL= 40 LITRES

    ALL VEHICLE COMPONENTS (EXCEPT A VERY FEW INTERNAL ENGINE PARTS) ARE CARBON FIBER, KEVLAR, AND TITANIUM
    ...... NO OTHER MATERIALS USED .......

    THE TRENTEK CHASSIS IS THE WORLD'S STIFFEST, LIGHTEST AND MOST COST EFFICIENT CAR CHASSIS. MADE OF COMPOSITE CARBON FIBER/HONEYCOMB KEVLAR, THE TRENTEK CHASSIS FOR THE MT900 WEIGHS IN UNDER 90LBS, (LESS ENGINE, TRANS, WIRING, SUSPENSION, ETC.) AND COULD BE PUT TOGETHER, BY HAND, IN APPROXIMATELY 20 MINUTES, ELIMINATING THE NEED FOR AN EXPENSIVE ASSEMBLY LINE. THIS CHASSIS IS OFFERED EXCLUSIVELY THROUGH TRENNE TECHNOLOGIES, INC. AND TEKLAM CORPORATION. VEHICLE WEIGHS 777 KILOS (1,709 LBS.), WITHOUT FUEL

    ACTUAL TOP SPEED = 305 MPH+
    CFD/FEA CATIA V5R19, THEORETICAL PHYSICAL TOP SPEED = 375 MPH+
    CFD/WIND TUNNEL WITH IAD AERODYNAMIC MODIFICATIONS
    COMPUTATIONAL FLUID DYNAMICS VERIFIED AERODYNAMICALLY SOUND AT OVER 400 MPH (AFTER EXTENSIVE IAD AERODYNAMIC MODIFICATION)
    (CFD/FEA CATIA V5R19 VERIFIED WITH IAD AERODYNAMIC MODIFICATIONS-AERODYNAMICALLY LIMITING VEHICLE TO 305 MPH, WITH REAR WING ATTACHED)

    TOP SPEED = 375 MPH+ WITH 118 OCTANE RACING FUEL, WITH IAD AERODYNAMIC MODIFICATIONS
    LIMITED TO 305 MPH, WITH REAR WING ATTACHED, GASOLINE/METHANOL FUEL MIX
    0-60 MPH = 2.5 SECONDS
    0-150 MPH = 6.7 SECONDS
    0-250 MPH = 17.5 SECONDS
    1/4 MILE = 9.0 SECONDS
    1/4 MILE SPEED = 178 MPH
    ZERO TO 150 MPH AND BACK TO ZERO = 8.7
    BRAKING: 250 MPH TO ZERO IN 8.5 SECONDS

    SPECIFCALLY DESIGNED AS THE WORLDS FASTEST PRODUCTION VEHICLE

    IT'S SCHEDULED TO RUN AT BONNEVILLE SPEED WEEK IN 2009, FOR THE GUINNESS WORLD BOOK OF RECORDS PEOPLE, AND WHEN CONFIRMED, IT'S OFF TO NURBUGRING, WHERE MICHAEL SCHUMACHER (IF EVERYTHING GOES AS DISCUSSED) WILL PUSH IT AS HARD AS POSSIBLE.

    IT'S CURRENTLY SCHEDULED FOR SEVERAL FEATURE FILMS, SEVERAL MUSIC VIDEOS, STILL SHOOTS, AND COMMERCIALS... AND LOT'S MORE!




    Other article:
    Special Editions:Mosler MT900 GTR XX Sales Begin
    Faster, Lighter Mosler MT900 GTR XX in the Works
    Gumball 3000 pass the sunny south California
    Gumball 3000 pass the sunny south California


    Source URL: http://nensycarblog.blogspot.com/2009/05/mosler-mt900-gtr-xx-twin-turbo-land.html
    Visit NENSY CAR BLOG for Daily Updated Hairstyles Collection

0 comments:

Post a Comment

Blog Archive

My Ping in TotalPing.com